Support for VR
- Embroidery pattern does not sew out correctly.
- Loops appear on the surface of the fabric when embroidering.
- The thread tension is incorrect.
- There is puckering in the fabric.
- There are needle cuts or holes in the garment.
- Although the thread is not broken, a broken thread error occurs and the machine stops.
- Stitches are skipped.
- Nothing happens, even if the LCD display is pressed.
- Upper thread tightened up.
- Why does the upper thread keep breaking?
- Why does the needle keep breaking?
- Bobbin thread does not wind neatly on the bobbin.
- The machine is noisy while embroidering.
- The needle threader cannot be used.
- The bobbin thread breaks.
- LED pointer does not indicate the position correctly.
- The upper thread does not reach the bobbin thread when embroidering begins. Show More Show Less